Daewoo MUSSO Service Manual page 304

Measurement of Mating Surface
1. Measure the height (H) of the cylinder head (refer to Service
data standard ).
2. Check the mating surface of the cylinder head.
3. Mill the sharp edge of the combustion chamber.
4. Re-measure the height (H) of the cylinder head.
5. Seal the intake and exhaust valves.
6. Measure the dimension (T) between the camshaft bearing
and the valve system (refer to Service data standard ).
7. Mill the cylinder head valve seat (refer to Service data
standard ).
Universal Tool
Surface Grinding Machine
M161 ENGINE MECHANICAL 1B2-113
Sceledum, Type RTY
Roaro
Schio/Italy