Daewoo MUSSO Service Manual page 272

Tools Required
000 589 58 43 00 Chain Assembly
103 589 01 63 00 Rivet Set
001 589 72 21 00 Torque Wrench
Replacement Procedure
1. Position the NO.1 cylinder to ATDC 20°.
2. Insert the pin to the intake and exhaust camshaft flange.
3. Remove the chain tensioner.
4. Mount the wedges to both sides of the camshaft sprocket
as shown in the figure.
5. Cover the chain housing with a clean cloth, and grind off
the timing chain pin from the intake camshaft sprocket with
the grinder.
M161 ENGINE MECHANICAL 1B2-81