Crankshaft Rear Radial Seal - Daewoo MUSSO Service Manual

CRANKSHAFT REAR RADIAL SEAL

Preceding Work : Removal of flywheel or drive plate
1 Special Tool
2 Special Tool
Tools Required
601 589 03 43 00 Sleeve
Replacement Proceudre
1. Remove the radial seal with a screw driver.
Notice
Use a clean cloth not to damage the radial seal mounting
hole and the crankshaft.
2. Install the special tool (2) to the crankshaft.
3. Apply the engine oil on the special tool (2).
Notice
Do not use the grease.
4. Install the radial seal on the inner parts assembler.
5. Press in the special tool (1) until the radial seal is stopped.
6. Check for leaks while operating the engine.
M161 ENGINE MECHANICAL 1B2-53
3 Crankshaft Rear Seal