Daewoo MUSSO Service Manual page 237

1B2-46 M161 ENGINE MECHANICAL
8. Unscrew the bolts (A).
Installation Notice
Tightening Torque
9. Remove the belt pulley and vibration damper.
Installation Notice (Center Bolt)
Tightening Torque
10. Unscrew the bolts (1, 2) on timing gear case cover and
remove the timing gear case cover.
Installation Notice
Tightening Torque
Notice
Be careful not to damage the cylinder head gasket.
11. Remove the radial shaft seal
Notice
Installation note replace the seal with new one.
12. Clean the timing gear case cover and crankcase sealing
surface.
13. Replace the O-ring with new one and apply the sealant on
the sealing surface.
Notice
Be careful not to stain the oil chamber of chain tensioner
with the sealant.
14. Installation should follow the removal precedure in the
reverse order.
15. Warm up the engine and check for oil leaks.
22.5 - 27.5 Nm
1st step 180 - 220 Nm
2nd step 80° - 100°
22.5 - 27.5 Nm