Daewoo MUSSO Service Manual page 242

2. Remove the start motor and install the engine lock to the
flywheel ring gear.
3. Remove the center bolt.
Installation Notice
Tightening Torque
4. Remove the vibration damper assembly using the puller.
5. Installation should follow the removal procedure in the
reverse order.
Notice
If possible, don't separate the vibration damper and the
pulley.
1st step 180 - 220 Nm
2nd step + 90°
Engine Lock 602 589 00 40 00
M161 ENGINE MECHANICAL 1B2-51