Daewoo MUSSO Service Manual page 259

1B2-68 M161 ENGINE MECHANICAL
7. Remove the bearing cap, and remove the intake and the
exhaust camshaft.
Installation Notice
Tightening Torque
Notice
Check the numbers on the bearing cap not to be miked
up.
8. Apply the engine oil on the valve tappet and camshaft
bearing.
9. Installation should follow the removal procedure in the
reverse order.
Notice
Base circle of cam should cantact with the valve tappet.
Install the camshaft bearing caps according to the
numbers on the cylinder head cast and bearing cap.
10. Check the camshaft timing position.
22.5 - 27.5 Nm