Daewoo MUSSO Service Manual page 214

Removal & Installation Procedure
1. Remove the belt pulley after removal of poly v-belt.
Installation Notice
Tightening Torque
Notice
Pull the tensioning pulley counterclockwise as shown in the
figure.
2. Disconnect the hydraulic pipe of the power steering pump
and drain the oil.
3. Unscrew the bolts (arrows) and remove the steering pump.
Installation Notice
Tightening Torque
4. Remove the compressor after disconnecting the wiring
connector and refrigerant pipe of A/C compressor.
Notice
Discharge all the refrigerant before removing the pipes.
40.5 - 49.5 Nm
22.5 - 27.5 Nm
M161 ENGINE MECHANICAL 1B2-23