Safety Vision SVR-4100 User Manual page 18

SvR-4100 USeR gUide
The firmware can only be updated to
a version more current the firmware
currently installed.
Upgrade
Periodically Safety Vision releases new firmware
updates for the SVR-4100 to increase functionality
and features.
Use the following procedure to update the SVR-4100 firmware:
1.
Obtain the firmware update file from Safety Vision Technical
Support.
2.
In the root directory of a USB flash drive create a folder titled
dvrupgrade.
3.
Place the firmware update file in the dvrupgrade folder.
4.
Insert the USB flash drive in the front USB port of the
SVR-4100.
5.
Access the Upgrade menu.
6.
Ensure FIRMWARE is selected in the drop-down menu.
The MCU update function is not active at this time.
7.
Select UPGRADE.
The update process begins.
The SVR-4100 first checks for an appropriate upgrade file. If one is detected, it
automatically restarts.
Upon restarting, the SVR-4100 displays "System Updating..." on the external
monitor while it installs the upgrade.
When complete, "System Initializing..." is displayed, and the SVR-4100 starts as
normal.
The firmware update has been successfully installed and it is safe to remove the
USB flash drive.