Safety Vision SVR-4100 User Manual page 39

Acceleration
The Acceleration menu controls
the thresholds of the SVR-4100's
accelerometers that trigger an overshock
(SHK) event.
Use the remote control to configure the
following options:
EN: Select ON to enable the SHK event.
Select OFF to disable it.
THRESHOLD: Use the number keys on
the remote control to enter the amount
of force (in Gs) for each axis (X, Y, and Z)
at which the event is triggered.
ALARM: Select ON to enable the ALM
LED on the front of the SVR-4100 when
the THRESHOLD force is reached and an
event is triggered. This LED continues to
flash after an event is triggered until the
configuration menus are accessed.
LOCK: Select ON to lock the video of
the event recorded when the THRESHOLD force is reached (not allowing it to be
overwritten).
For more information about
connecting the SVR-4100 to to an
accelerometer unit, please contact
Safety Vision Technical Support.
37