Components - Safety Vision SVR-4100 User Manual

SvR-4100 USeR gUide
For further information regarding the
configuration of the SVR-4100, see the
Configuration chapter.

Components

1 - USB Port
- Insert a USB flash drive to download events quickly without having
to remove the Secure Digital (SD) card.
2 - External Monitor Output
with an RCA plug here to configure the mobile digital video recorder (MDVR).
3 - Door Lock
- The Door Lock secures the door over the SD card slot for security.
4 - SD Card Slot
- Insert an SD card into the slot behind the door until it clicks.
To remove the SD card, briefly press it in until it ejects.
5 - SD Card Slot Door
- The SD Card Slot Door protects the SD card from
contaminants and damage.
6 - Status LEDs
- The Status LEDs illuminate to display the current status of the
SVR-4100.
- Flashes when the SD card is being accessed.
- An error may have occured.
- The GPS LED illuminates when the GPS module is searching for a signal; it
then flashes steadily when locked on.
- The unit is interfacing with an optional Ethernet device.
- The unit is receiving power.
- The unit is recording video.
- One or more cameras have become detached or are malfunctioning.
- An alarm has occured (as configured in the Configuration Menu).
- Attach an external monitor to the SVR-4100