Configuration; System Menu - Safety Vision SVR-4100 User Manual

SvR-4100 USeR gUide
The SVR-4100 must have a clear GPS
signal to syncronize its time via GPS,
or it must have network access to
syncronize by NTP.

Configuration

Time: Use the number keys on the remote to set the current time manually.
FORMAT: Select from 12 hour (12H) or 24 hour (24H) time formats.
TIME SYNC SOURCE: Select Global Positioning System (GPS), Network Time
Protocol (NTP), or manual (NONE).
TIME ZONE: Select how many hours the local time zone is deviated from GMT. (In
Select the Configuration icon
to display the System, Record,
Network, and Event menus.
These menu options allow you to
configure how the MDVR operates,
in addition to setting passwords
and updating the firmware.

System Menu

date/time
The Date/Time menu determines
the system time that appears on
recorded video.
Date: Use the number keys on
the remote to set the current date
manually.
FORMAT: Select from middle
endian (MM/DD/YYYY), little
endian (DD/MM/YYYY), or big
endian (YYYY-MM-DD) date
formats.
the United States, Eastern is "-5", Central
is "-6", Mountain is "-7", and Pacific is "-8".)
SYNC TIME: Use the number keys on
the remote to manually enter the time
at which the SVR-4100 synchronizes the
time by NTP.
NTP SERVER IP: Use the number keys
on the remote control to manually enter
the IP address of the server by which the
SVR-4100 synchronizes time by NTP.
DST: Turn Daylight Savings Time
adjustments on (ON) or off (OFF).
DST MODE: Only available when DST
is set to ON. Select AUTO to adjust the
time automatically at 2:00 AM on the
second Sunday in March and the first
Sunday in November, or select CUSTOM
to select which Sundays in which
months.