Appendix A: Web Application Manager - Safety Vision SVR-4100 User Manual

Appendix A: Web Application Manager

The SVR-4100 includes a web server, called the Web Application Manager, that can
be accessed with a Windows based PC and browser. The Web Application Manager
includes Live View, Playback, Setup (Configuration) and Maintenance menus. It
provides much of the same functionality as an external monitor and remote control
when these accessories are not available or practical.
Use the following procedure to access the Web Application Manager:
1.
Determine the IP Address of the SVR-4100 on the Local Network
menu.
This can be accomplished beforehand with an external monitor and
remote control. The default IP address is 192.168.000.100.
2.
Connect the PC to the DVR's RJ-45 port with a standard Ethernet
cable.
3.
Ensure the DVR is receiving power and has started up.
4.
Set a sequential static IP address for the LAN connection connected
to the DVR.
For example, if the DVR's IP address is 192.168.000.100, set a static IP
address of 192.168.000.101.
In Windows, this can be accomplished in the Internet Protocol (TCP/IP)
Properties window, accessed through the properties of the Local Area
Connection.
5.
On a web browser, navigate to the DVR's IP address.
6.
Run any Active X controls, such as MDvrOcx.ocx and SVT MDVR
Web, if and when prompted by your web browser.
The Login screen appears.
7.
If the DVR's password is enabled, enter it in the
and click login. (If the password is not enabled, simply click
login.)
The Web Application Manager launches.
PASSWoRd field
45