Front Door Assembly Installation - Daewoo Nubira Owner's Manual

9P – 26IDOORS
4. Disconnect the body–to–door rubber grommet and
the electrical connector.
Installation Procedure
1. Connect the electrical connector and the body–to–
door rubber grommet.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. With the aid of another technician, lightly secure the
front door with the door hinge bolts.
3. Adjust the door for proper fit.
Tighten
Tighten the door hinge bolts to 25 NSm(18 lb–ft).
4. Install the door hold open link to the body with the
bolt.
Tighten
Tighten the door hold open link–to–body bolt to 27
NSm (20 lb–ft).
5. Connect the negative battery cable.
6. Perform the waterleak test. Refer toSection 9I, Wa-
terleaks.
7. Check for windnoise. Refer toSection 9J, Wind-
noise.
DAEWOO V–121 BL4