Daewoo Nubira Owner's Manual page 494

1998-2001 nubira
Hide thumbs Also See for Nubira:
Table of Contents

Advertisement

Step
14
Replace the engine fuse block.
Is the repair complete?
15
With the headlamp relay removed, use a voltmeter
to check the headlamp relay connector terminal 85.
Does the voltmeter indicate the value specified?
16
1. With the headlamp relay removed, turn the
headlamps to low–beam.
2. Use an ohmmeter to check the continuity be-
tween connector relay terminal 86 and ground.
Does the ohmmeter indicate the specified value?
17
1. Reinstall the headlamp relay.
2. Check the voltage at the headlamp switch con-
nector C2 (terminal 2).
Does the voltage equal the specified value?
18
Repair the open circuit between headlamp relay ter-
minal 85 and the headlamp switch connector C2 ter-
minal 2.
Is the repair complete?
19
1. Disconnect the headlamp switch connector C2.
2. Turn the low–beam headlamps ON.
3. Use an ohmmeter to check the continuity be-
tween terminals 2 and 3 of headlamp combina-
tion switch C2.
Does the ohmmeter indicate the specified value?
20
Replace the headlamp switch.
Is the repair complete?
21
Repair the open circuit between terminal 3 of head-
lamp switch connector C2 and ground.
Is the repair complete?
22
Check the voltage at headlamp switch connector
C1, (terminal 6).
Does the voltage equal the specified value?
23
Repair the open circuit between headlamp switch
connector C1 and terminal 87 of the headlamp relay.
Is the repair complete?
24
1. Disconnect headlamp switch connector C1.
2. Turn the headlamps to the low–beam position.
3. Connect an ohmmeter between terminals 5
and 6 of headlamp switch connector C1.
4. Turn the high–beam headlamps ON.
5. Connect an ohmmeter between terminals 4
and 6 of the headlamp switch.
Does the ohmmeter show the specified value for
both of the tests?
25
Repair the open circuit between the headlamp
switch and fuses EF30, EF25, EF31, and EF26.
Is the repair complete?
Diagnostic Aids
The daytime running lamp (DRL) system will not work if the parking brake is applied. The system is designed to work only
when the engine is running and the parking brake is released. If the parking brake circuit is shorted to ground or the switch
stays closed when the engine is running, the DRL system will not work.
DAEWOO V–121 BL4
Action
LIGHTING SYSTEMS 9B – 15
Value(s)
Yes
System OK
11–14 v
Go to Step 16
[ 0 W
Go to Step 22
11–14 v
Go to Step 19
System OK
[ 0 W
Go to Step 21
System OK
System OK
11–14 v
Go to Step 24
System OK
[ 0 W
Go to Step 25
System OK
No
Go to Step 14
Go to Step 17
Go to Step 18
Go to Step 20
Go to Step 23
Go to Step 20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents