4E – 14IREAR DISC BRAKES
15. Install the wheel hub assembly, and secure it with
the wheel hub assembly–to–spindle shaft castle
nut.
Tighten
Tighten the wheel hub assembly–to–spindle shaft
castle nut to 25 NSm (18 lb–ft), plus 1 NSm (9 lb–in).
16. Install the shaft dust cover.
17. Install the parking brake cable to the parking brake
lever on each side of the vehicle.
18. Adjust the parking brake. Refer toSection 4G, Park-
ing Brake.
19. Install the rotor. Refer to"Rotor"in this section.
DAEWOO V–121 BL4