Daewoo Nubira Owner's Manual page 524

9D – 10IWIPERS/WASHER SYSTEMS
Step
13
1. Connect an ohmmeter between terminals A1
and A3 of the rear window wiper switch.
2. Move the rear window wiper switch to the
WIPE position.
Does the ohmmeter indicate the specified value?
14 Repair the open circuit between terminal A1 of the
rear window wiper connector (WHT wire) and the
rear window wiper motor.
Is the repair complete?
15 Replace the rear window wiper switch.
Is the repair complete?
Action Value(s) Yes
[ 0 W
Go to Step 14
System OK
System OK
No
Go to Step 15
DAEWOO V–121 BL4