Daewoo Nubira Owner's Manual page 716

Step
33
1. Turn the ignition ON.
2. Turn the cruise control main switch ON.
3. Select SET on the cruise control lever switch.
4. While holding the lever switch in the SET posi-
tion, check the voltage at terminal 2 of the con-
nector for the cruise control actuator.
Does the voltmeter indicate the specified value?
34
1. Disconnnect the 6–pin connector from the lever
switch.
2. Turn the ignition ON.
3. Turn the cruise control main switch ON.
4. Check the voltage at terminal 3 of the wiring
harness side of the 6–pin lever switch connec-
tor.
Is the voltage equal to the specified value?
35 Repair the open circuit between the cruise control
main switch and the cruise control lever switch.
Is the repair complete?
36
1. Disconnect the 6–pin connector from the lever
switch.
2. Connect an ohmmeter between terminals 3
and 8 at the switch side of the 6–pin connector.
3. Observe the ohmmeter when moving the lever
switch to the SET position.
Does the ohmmeter indicate the specified value?
37 Replace the lever switch.
Is the repair complete?
38 Repair the open circuit between the leverswitch con-
nector terminalB6 and the cruise control actuator
connector terminal 2.
Is the repair complete?
39
1. Turn the ignition ON.
2. Turn the cruise control main switch ON.
3. Select RESUME on the cruise control lever
switch.
4. While holding the lever switch in the RESUME
position, check the voltage at terminal 7 of the
connector for the cruise control actuator.
Does the voltmeter indicate the specified value?
40 Use the ohmmeter to check foran open circuit be-
tween terminalB1 of thewiring harness at the lever
switch and terminal 7 of the actuatorconnector.
Does the ohmmeter indicate the specified value?
41 Repair the open circuit between terminalB1 of the
leverswitch connectorand terminal 7 of the cruise
control actuatorconnector.
Is the repair complete?
DAEWOO V–121 BL4
Action
CRUISE CONRTOL SYSTEM 9U – 9
Value(s) Yes
11–14 v Go to Step 39
11–14 v Go to Step 36
System OK
[ 0 W
Go to Step 38
System OK
System OK
11–14 v Go to Step 42
[ 0 W
Go to Step 37
System OK
No
Go to Step 34
Go to Step 35
Go to Step 37
Go to Step 40
Go to Step 41