Rear Door Glass Run Installation - Daewoo Nubira Owner's Manual

9P – 10IDOORS
4. Remove the glass run.
Installation Procedure
1. Install the glass run.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the exterior garnish molding with the screws.
Tighten
Tighten the rear door exterior garnish molding screws
to 1.5 NSm (13 lb–in).
3. Install the interior garnish molding.
4. Install the rear door glass. Refer to Section 9L,
Glass and Mirrors.
DAEWOO V–121 BL4