DAEWOO V–121 BL4
BUMPERS AND FASCIAS 9O – 11
8.
Install the rear wheel well splash shields with the
bolts and the screws.
Tighten
Tighten the rear wheel well splash shield bolts to 1.5
NSm (13 lb–in).
9.
Install the rear wheel mud guards with the bolts.
Tighten
Tighten the rear wheel mud guard bolts to 1.5 NSm (13
lb–in).
REAR BUMPER ENERGY
ABSORBER
(Notchback Shown, Hatchback and
Wagon Similar)
Removal Procedure
1.
Remove the rear bumper fascia. Refer to"Rear
Bumper Fascia" in this section.
2.
Remove the energy absorber.
Installation Procedure
1.
Install the energy absorber.
2.
Install the rear bumper fascia. Refer to"Rear Bump-
er Fascia" in this section.