Engine Under Cover Removal; Engine Under Cover Installation - Daewoo Nubira Owner's Manual

DAEWOO V–121 BL4
FRAME AND UNDERBODY 9N – 3
ENGINE UNDER COVER
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the screws and the front fascia splash
shield.
3. Remove the screws, the nuts, and the engine under
cover.
Installation Procedure
1. Install the engine under cover with the screws and
the nuts.
Tighten
Tighten the engine under cover nuts to 2 NSm (18
lbin).
2. Install the front fascia splash shield with the screws.
Tighten
Tighten the front fascia splash shield screw to 1.5
NSm (13 lb–in).
3. Lower the vehicle.