DAEWOO V–121 BL4
MAINTENANCE AND REPAIR
ON–VEHICLE SERVICE
HORNS
(Left Horn Shown, Right Horn Similar,
If Equipped)
Removal Procedure
1.
Disconnect the negative battery cable.
2.
Disconnect the electrical connector.
3.
Remove the bolt and the horn.
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1.
Install the horn with the bolt.
Tighten
Tighten the horn bolt to 22 NSm (16 lb–ft)
HORNS 9C – 3