9M – 2IEXTERIOR TRIM
MAINTENANCE AND REPAIR
ON–VEHICLE SERVICE
B–PILLAR MOLDING
Removal Procedure
1.
Reposition the weatherstrip in order to access the
screws.
2.
Remove the screws and the B–pillar molding.
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1.
Install the screws and the B–pillar molding.
Tighten
Tighten the B–pillar molding screws to 4 NSm (35
lbin).
2.
Install the weatherstrip to its original position.
QUARTER WINDOW MOLDING
(WAGON)
Removal Procedure
1.
Open the rear passenger door.
2.
Remove the screws and the quarter window mold-
ing.
DAEWOO V–121 BL4