Fuel Cutoff Switch Removal; Fuel Cutoff Switch Installation - Daewoo Nubira Owner's Manual

DAEWOO V–121 BL4
ENGINE CONTROLS 1F – 401
FUEL CUTOFF SWITCH
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the passenger front rocker trim panel. Re-
fer to Section 9G, Interior Trim.
3. Remove the lower B–pillar trim panel. Refer to Sec-
tion 9G, Interior Trim.
4. Reposition the carpet.
5. Remove the fuel cutoff switch mounting bolts.
6. Disconnect the electrical connector at the fuel cutoff
switch.
Installation Procedure
1. Connect the electrical connector at the fuel cutoff
switch.
2. Install the fuel cutoff switch mounting bolts.
Tighten
Tighten the fuel cutoff switch mounting bolts to 27 lb–
in (3 NSm).