Daewoo Nubira Owner's Manual page 334

4E – 12IREAR DISC BRAKES
5. Slide the new dust cover onto the dust cover
notches.
6. Insert the new lever and the dust cover assembly
into the backing plate.
7. Secure the new dust cover retainer using pop riv-
ets.
8. Lubricate the actuation cavity and the tappet with
grease. Ensure that the internal bore of the cavity is
covered with grease.
9. Secure the splash shield and the backplate to the
steering knuckle with the bolts, and secure the
parking brake shoe hold–down spring assembly
with the screw.
Tighten
Tighten the splash shield bolts to 25 NSm (18 lb–ft).
Tighten the parking brake shoe hold–down spring as-
sembly screw to 3.5 NSm (31 lb–in).
10. Connect the new parking brake adjustment screw
to the new adjustment nut. Tighten the nut to where
it meets the screw, and then back off one–quarter
of a turn.
DAEWOO V–121 BL4