Daewoo Nubira Owner's Manual page 335

DAEWOO V–121 BL4
REAR DISC BRAKES 4E – 13
11. Install the adjustment screw and the adjustment nut
into the backing plate actuation mechanism on the
adjustment pawl side. Keep the shoe slot parallel
with the backing plate face.
12. Install the new pushrod into the tappet. Ensure the
pushrod is set correctly in the lever socket by hold-
ing the lever into the backing plate while inserting
the pushrod and the tappet.
13. Clean excess grease using a clean rag.
Important : The shoe assembly must be resting on the
splash shield with the brand side up.
Important : Clean hands are required when handling the
parking brake shoe.
14. Install the parking brake shoe engaging the shoe
tips in both the adjusting screw and the tappet
slots.