Daewoo Nubira Owner's Manual page 62

DAEWOO V–121 BL4
DOHC ENGINE MECHANICAL 1C – 23
41. Install the front timing belt cover.
42. Install the front timing belt cover bolts.
Tighten
Tighten the upper and lower front timing belt cover
bolts to 6 NSm (53 lb–in).
43. Install the crankshaft pulley.
44. Install the crankshaft pulley bolts.
Tighten
Tighten the crankshaft pulley bolts to 20 NSm (15 lb–
ft).
45. Install the right engine mount bracket and retaining
bolts.
Tighten
Tighten the right engine mount bracket retaining bolts
to 60 NSm (44 lb–ft).
46. Remove the engine assembly lift support
J–28467–B.
47. Install the serpentine accessory drive belt. Refer to
Section 6B, Power Steering Pump.
48. Connect the upper radiator hose to the thermostat
housing.
49. Install the right front splash shield.
50. Install the right front wheel. Refer to Section 2E,
Tires and Wheels.
51. Install the air filter housing.
52. Install the air filter housing bolts.
Tighten
Tighten the air filter housing bolts to 8 NSm (71 lb–in).
53. Connect the air intake tube to the throttle body.
54. Connect the breather tube to the valve cover.
55. Connect the intake air temperature sensor connec-
tor.
56. Connect the camshaft position sensor.