Daewoo Nubira Owner's Manual page 714

Step
11
1. Disconnect the electrical connector from the
cruise control actuator.
2. Turn the ignition ON.
3. Check the voltage at terminal H of the actuator
connector.
Is the voltage equal to the specified value?
12 Repair the open circuit between fuseF8 and the
cruise control actuatorconnector terminal 3.
Is the repair complete?
13 With the electrical connectorstill removed fromthe
cruise control actuator, use an ohmmeter tomeasure
the resistance between connector terminal 6 and
ground.
Does the ohmmeter indicate the specified value?
14 Repair the open circuit between ground and terminal
6 of the actuatorconnector.
Is the repair complete?
15 With the electrical connectorstill disconnected from
the cruise control actuator, use an ohmmeter to
measure the resistance between connector terminal
8 and ground.
Does the ohmmeter indicate the specified value?
16 Repair the open circuit between the actuator con-
nector terminal 8 and the instrument splice pack
S202.
Is the repair complete?
17
1. Turn the ignition ON.
2. With the electrical connector still disconnected
from the cruise control actuator, use a voltme-
ter to check the voltage at terminal 4 of the
connector.
Is the voltage equal to the specified value?
18 Repair the open circuit between fuseF5 and terminal
4 of the cruise control actuatorconnector.
Is the repair complete?
19
1. Turn the ignition ON.
2. With the electrical connector still disconnected
from the cruise control actuator, use a voltme-
ter to check the voltage at terminal 1 of the
connector.
Is the voltage equal to the specified value?
20 Repair the open circuit between fuseF8 and terminal
1 of the cruise control actuator.
Is the repair complete?
21
1. Turn the ignition ON.
2. Make sure that the cruise main switch is OFF.
3. With the electrical connector still disconnected
from the cruise control actuator, use a voltme-
ter to check the voltage at terminal 9 of the ac-
tuator connector.
Is the voltage equal to the specified value?
DAEWOO V–121 BL4
Action
CRUISE CONRTOL SYSTEM 9U – 7
Value(s) Yes
11–14 v Go to Step 13
System OK
[ 0 W
Go to Step 15
System OK
[ 0 W
Go to Step 17
System OK
11–14 v Go to Step 19
System OK
11–14 v Go to Step 21
System OK
[ 0 v
Go to Step 23
No
Go to Step 12
Go to Step 14
Go to Step 16
Go to Step 18
Go to Step 20
Go to Step 22