Operator Panel Operation
4.3.3
Referencing setup information for the library
It is possible to reference library information such as configuration information, Vendor
ID, Product ID, and setup information.
1) Select the [Library] button from the INFORMATION menu.
2) The following information is displayed:
4.3.4
Referencing information about the drive
It is possible to reference the Target (Loop) ID of the drive, Addressing mode setting,
Vendor ID, Product ID, and WWPN/WWNN.
1) Select the [Drive] button from the INFORMATION menu.
2) Specify the drive number.
3) The following information about the specified drive is displayed:
4-20
INFORMATION menu
+Library
-
Model type/Model name
-
Configuration information
--
Number of general cells (excluding cleaning cells, reserve cells, and
diagnostics cells)
--
Number of installed drives
--
Number of installable magazines
-
Library setup information
--
Library Vendor ID/Product ID
--
Setup status of the auto cleaning function
--
Setup status of the auto inventory function
--
Setup status of the auto eject function
--
Setup status of the fast load function
INFORMATION menu
+Drive
INFORMATION menu
-Drive
+DRV#00
+DRV#01
-
Type of interface (Fibre Channel)
-
Addressing mode (Hard Address/Soft Address)
-
LOOP ID
-
Vendor ID/Product ID
-
Serial number
C144-E072-01EN