Table of Contents
Advertisement
From the Input Source list, select the audio source type corresponding to
10
the device to which the microphone is connected. For example, if the
microphone is connected to an XLR device on X.linkLE, select XLR
(balanced analog)
Test the audio input levels by speaking into the microphone and use the VU
11
meters in the Audio Input Levels window to check the audio input levels.
While speaking into the microphone, watch the input levels and adjust the
audio level on your source device if needed.
¦ Note
The Meter Input(s) Only option is not supported in Adobe Premiere
Pro's Audio Mixer when using the Matrox ASIO driver as the default device.
Click OK to save your settings, then click OK to close the Project Settings
12
dialog box.
Recording your voice-over
You use Adobe Premiere Pro's Audio Mixer to record your voice-over. For
further information on using the Audio Mixer, see your Adobe Premiere Pro
documentation.
Choose Window > Audio Mixer , then select the sequence in which you
1
want to record your voice-over (for example, Window > Audio Mixer >
Sequence 01
Position the current-time indicator in the Timeline panel where you want the
2
voice-over to begin.
.
).
Adding a voice-over to your sequence
97
Advertisement
Table of Contents
