Recording Your Voice-Over - Matrox Axio LE Installation And User Manual

From the Input Source
10
the device to which the microphone is connected. For example, if the
microphone is connected to an XLR device on X.linkLE, select
(balanced analog)
11 Test the audio input levels by speaking into the microphone and use the VU
Audio Input Levels
meters in the
While speaking into the microphone, watch the input levels and adjust the
audio level on your source device if needed.
¦ Note The Meter Input(s) Only
Pro's Audio Mixer when using the Matrox ASIO driver as the default device.
OK
12 Click to save your settings, then click
dialog box.

Recording your voice-over

You use Adobe Premiere Pro's Audio Mixer to record your voice-over. For
further information on using the Audio Mixer, see your Adobe Premiere Pro
documentation.
Window > Audio Mixer
1 Choose
want to record your voice-over (for example,
Sequence 01 ).
2 Position the current-time indicator in the
voice-over to begin.
list, select the audio source type corresponding to
.
window to check the audio input levels.
option is not supported in Adobe Premiere
, then select the sequence in which you
Adding a voice-over to your sequence
OK Project Settings
to close the
Window > Audio Mixer >
Timeline panel where you want the
97
XLR