Table of Contents
Advertisement
14
Install your Matrox Axio LE card
Your Matrox Axio LE card is designed to operate in either a PCIe or PCI-X slot,
depending on which type of Axio LE card you have. The PCIe version requires a
PCIe x4 (or greater) slot that is electrically wired with at least four lanes. For
both versions of Axio LE, you need an additional PCI slot near the Axio LE card
to install the analog audio cable bracket. If any of the two slots in which you'll be
installing your Axio LE card and analog audio cable bracket contain other cards,
either move them to unused slots or remove them completely.
° To install your Axio LE card:
Make sure the internal power supply cable is connected to your Axio LE
1
card (PCIe version), as explained in
cable to your Axio LE PCIe card"
Make sure the internal analog audio cable is connected between the Axio LE
2
card and the audio cable bracket as explained in
audio cable to your Axio LE card"
Remove the metal plates located at the back of the two slots you'll be using
3
for your Axio LE card and the audio cable bracket. Save the screws for the
mounting brackets.
4
Position your Axio LE card and audio cable bracket over the two slots that
you've chosen and push them in firmly and evenly until they are fully seated
in the slots.
Connect the male end of the internal power supply cable on your Axio LE
5
card (PCIe version) to a free power outlet of your computer's internal power
supply.
Using the fasten screws you removed in step 3, secure your Axio LE card
6
and audio cable bracket to the computer frame.
Using the four small screws provided with your Axio LE audio cable
7
bracket, secure the two ends of the audio cable bracket to the computer
frame.
Replace your computer's cover.
8
Before restarting your computer
You must connect your external devices such as X.linkLE breakout box, VTRs,
etc., before attempting to restart your computer. For details about these tasks, see
Chapter 3, "Connecting External Devices to Matrox Axio
Chapter 2, Installing Your Matrox Axio LE Hardware
"Connect the internal power supply
on page 12.
"Connect the internal analog
on page 13.
LE."
Advertisement
Table of Contents
