Matrox Axio Installation And User Manual page 82

Axio systems
Hide thumbs Also See for Axio:
Table of Contents

Advertisement

62
If the Pulldown Method list is available, select the pulldown method you
5
want to be applied to your output video ( Standard 2:3 or Advanced
2:3:3:2
output format, a pulldown method may automatically be selected.
Under Analog Setup (NTSC) , select the setup level you want for your
6
NTSC analog video:
$
$
Select Allow Super White to allow the highest luminance level of your
7
video output to exceed the standard maximum white level. Select Allow
Super Black
below the standard black level.
¦ Note
your final video production for broadcast.
Under Component Gain , use the sliders to increase or decrease the Y
8
(luminance), Cb (blue minus luminance), and Cr (red minus luminance) gain
of the component video output.
Under Advanced Settings , select the format you want for your component
9
video output, and make any required timing adjustments to your SDI video
output:
$
$
10
Click OK to save your settings and return to the Sequence Settings dialog
box.
Chapter 7, Defining Your Adobe Premiere Pro Settings
correct proportions on an NTSC or PAL monitor, select the 16:9 display
setting on the monitor.
). Depending on your sequence's frame rate and the current master
0 IRE
Applies a setup level of 0 IRE. You should select this option only
when working with a commercial DV device that uses the Japanese
analog NTSC setup of 0 IRE. For example, if the video appears too bright
when you play back DV clips on your NTSC monitor, you can change the
setup to 0 IRE to output your DV clips at the correct brightness.
7.5 IRE
Applies the standard NTSC setup level of 7.5 IRE.
to allow the lowest luminance level of your video output to fall
Super white and super black should not be allowed when producing
Component Output Format
) that matches your component video output connections. For
RGB
example, if the component video output from X.linkHD is connected to a
video monitor using analog component Y, R-Y, and B-Y, connections,
select YUV .
SDI Horizontal Delay
horizontal timing of the SDI video output.
From this list, select the format ( YUV or
Use this slider to advance or delay the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Axio and is the answer not in the manual?

Questions and answers

Table of Contents