Table of Contents
Advertisement
group that is presently not available, you must mute both audio pairs from
one of the currently selected groups.
Click OK to save your settings and return to the Sequence Settings dialog
6
box.
Selecting your DV-1394 output settings
You can choose to output a Matrox sequence over the 1394 interface to perform
an export to a DVCPRO HD device.
¦ Note
DV-1394 export to DVCPRO HD is supported for 1080i @ 25 fps,
29.97 fps, and 720p @ 59.94 fps sequences only. For more information about
exporting to a DVCPRO HD device, see
using DV-1394 device control"
° To select your DV-1394 output settings:
Choose Sequence > Sequence Settings and click the Playback
1
Settings
Click the DV-1394 Output tab.
2
Select Enable 1394 output for export to tape if you want your sequence
3
to be output over the 1394 interface when you perform an export to tape (that
is, when you choose File > Export > Export to Tape ). This lets you record
your sequence to a DVCPRO HD device.
¡ Important Because this option requires additional system resources, you
may find that when this option is selected some effects that were previously
realtime will drop frames and require rendering (you'll see a red bar over
these segments after playing back your sequence). Therefore, you should
select this option only when you want to export your sequence to a
DVCPRO HD device.
Click OK to save your settings and return to the Sequence Settings dialog
4
box.
on page 103.
button.
"Exporting to a DVCPRO HD device
Defining your sequence settings
75
Advertisement
Table of Contents
