Adding A Voice-Over To Your Sequence; Connection And Setup - Matrox Axio Installation And User Manual

96

Adding a voice-over to your sequence

Matrox Axio supports voice-over, which allows you to record audio tracks as
.wav files directly in the Timeline panel to add commentary to video clips, such
as newsreels and documentaries.
Remarks
• To use Matrox Axio voice-over, you must have an audio input for the
voice-over as well as a valid video input. The video input is required only for
genlock purposes. It's recommended that you genlock all the devices
connected to your Matrox Axio system to a reliable external genlock source.
For details on selecting your genlock source, see
settings"
• Matrox voice-over does not support pulldown. Therefore, this feature is not
supported for a 486p @ 23.98 fps sequence, or a 1080p @ 23.98 fps
sequence if your input format is set to 1080i @ 29.97 fps.
• Matrox voice-over supports recording to stereo or mono audio tracks only.
• Because Matrox voice-over uses the Matrox Axio audio output mapping
settings in the Matrox Playback Settings dialog box, you must not use the
Audio Output Mapping settings in Adobe Premiere Pro's Preferences
dialog box to change your audio output mapping settings for the Matrox
ASIO driver.

Connection and setup

Connect the microphone to the audio input on your source device and
1
connect the audio output from the source device to the corresponding audio
input on your X.link breakout box.
Choose Edit > Preferences > Audio Hardware .
2
From the Default Device list, select Matrox ASIO Driver for Adobe
3
Premiere Pro
Choose Project > Project Settings > General .
4
Make sure that the Capture Format is set to Matrox AVI .
5
Click the Configure button, then click the Video Capture Settings tab.
6
From the Input Device list, select your X.link breakout box, such as
7
X.linkHD
¦ Note
From the Input Source list, select the video input that you're using as your
8
genlock source for the voice-over. For example, if the video input is
connected to the composite video input on your X.linkLE breakout box,
select Composite .
Click the Audio Capture Settings tab.
9
Chapter 7, Defining Your Adobe Premiere Pro Settings
on page 65.
, then click OK .
.
The Matrox voice-over feature does not support DV-1394 devices.
"Specifying your genlock