Table of Contents
Advertisement
78
Click the Configure button, then click the Video Capture Settings tab.
3
Under Input Device , select the device from which you want to capture
4
material (this may be automatically set for you based on your sequence's
video format):
$
$
¦ Note
576p @ 25 fps, 1440 ×1080p, and 720p @ 23.98 fps, 25 fps, and 29.97 fps
sequences.
$
¦ Note
@ 25 fps sequence.
5
If you selected an X.link breakout box as your input device, from the Input
Source
from X.linkLE or X.linkSD, select SDI , Component , Composite , or
S-Video
to SDI .
Chapter 7, Defining Your Adobe Premiere Pro Settings
X.linkLE
or X.linkSD to capture material from an analog or SDI video
source connected to your X.linkLE or X.linkSD breakout box.
to capture material from an SDI video source connected to your
X.linkHD
X.linkHD breakout box.
Analog and SDI input is not supported for 486p @ 29.97 fps,
to capture material from a DV-1394 device connected to your
DV-1394
system. For capture to a Matrox .avi file, DV-1394 input is supported only
for native DVCPRO HD capture when working with 1080i, 1080p
@ 29.97 fps, and 720p @ 23.98 fps, 25 fps, 29.97 fps, and 59.94 fps
sequences. For capture to a Matrox .m2v file, DV-1394 input is supported
for all SD sequences.
Capturing audio from a DV-1394 device is not supported for a 720p
list, select the type of input you want to capture. If you're capturing
. If you're capturing from X.linkHD, the Input Source will be set
Advertisement
Table of Contents
