Table of Contents
Advertisement
Exporting your sequence to tape
To export your Matrox sequence to tape without using device control, simply
play back your sequence and record the output from any of the available outputs
on your Matrox Axio system. If your recorder supports RS-422 device control,
you can export your sequence to tape using Matrox RS-422 device control as
explained in the next section,
control."
To export your Matrox sequence to a DVCPRO HD device over the 1394
interface, you can use Adobe DV/HDV device control as explained in
to a DVCPRO HD device using DV-1394 device control"
to a DV-1394 device other than DVCPRO HD, you must copy or import your
Matrox project into a native Adobe Premiere Pro project and use Adobe
DV/HDV device control as explained in your Adobe Premiere Pro
documentation.
Remarks
• To avoid repeated or missing frames when performing an export to tape with
device control, add about five seconds of black video or color bars to the
start of your sequence.
• To avoid problems when exporting your sequence to tape, make sure that
your project's auto-save feature is turned off. To do this, choose Edit >
Preferences > Auto Save
projects
auto-save feature back on.
Exporting to tape using Matrox RS-422 device
control
With Matrox RS-422 device control, you can perform either an insert or assemble
edit to record your Matrox sequence onto tape as follows:
Open your project, activate the Matrox sequence that you want to export to
1
tape, and position the work area bar over the section of the sequence that you
want to export.
If you haven't already done so, play back your sequence and render any
2
non-realtime sections that are identified with a red render bar.
Make sure that you've properly connected your recorder and configured
3
Matrox RS-422 device control as explained in
device control"
Load a striped recordable tape into your recorder, and set your recorder to
4
Remote or VTR mode.
"Exporting to tape using Matrox RS-422 device
and make sure that Automatically save
is not selected. Once your export is complete, you can turn the
on page 99.
on page 103. To export
"Setting up Matrox RS-422
Exporting your sequence to tape
101
"Exporting
Advertisement
Table of Contents
