Using The Matrox Mpeg-2 I-Frame Hd Codec For Offline Editing - Matrox Axio Installation And User Manual

200
This workflow scenario is represented in the following diagram:
Exported to tape as finishing-quality
Using the Matrox MPEG-2 I-frame HD codec
for offline editing
You can use the Matrox MPEG-2 I-frame HD codec to capture clips at a low data
rate of 50 Mb/sec for offline editing. You can then edit the offline sequence on
your Axio system, and later recapture the clips at a high quality to complete your
sequence as finishing-quality HD video for broadcast. This workflow is
described in
on an Axio system"
As an alternative, you can transfer your project and the offline-quality clips
you've captured to a remote editing workstation, such as a laptop, to complete
your offline edit using Adobe Premiere Pro with the Matrox VFW MPEG-2
I-frame HD codec (see
without the Axio hardware"
transfer the project back to your Axio system so that you can recapture your clips
at a high quality and create a finishing-quality project for broadcast. This
workflow is described in
editing on a remote system"
Appendix B, Matrox Axio Workflows
Video footage shot as any
supported HD format
Matrox MPEG-2 I-frame HD codec
set at 100 Mb/sec or higher used to
capture clips
Matrox online editing sequence
HD video for broadcast
"MPEG-2 I-frame HD codec workflow example for offline editing
on page 201."
"Installing the Matrox VFW software codecs on a system
"MPEG-2 I-frame HD workflow example for offline
MPEG-2 I-frame HD clips
used in a VFW application on
the Axio system or an offline
editing station.
Clips rendered using
the Matrox VFW
MPEG-2 I-frame HD
codec are imported into
the online editing
sequence.
on page 47). Once your edit is complete, you
on page 202.
VFW application, such as
Adobe After Effects, uses
the MPEG-2 I-frame HD
clips. The compositing
project is rendered using
the Matrox VFW MPEG-2
I-frame HD codec.