Exporting To A Matrox .Avi File - Matrox Axio Installation And User Manual

92

Exporting to a Matrox .avi file

Several software codecs are included with Adobe Premiere Pro so that you can
export your video to different formats. Your Matrox Axio system adds several
Matrox Video for Windows (VFW) codecs to the ones included with Premiere
Pro to allow you to export your sequence to a Matrox .avi file. For more
information about using the Matrox Video for Windows codecs, see
"Using the Matrox Video for Windows
If your system includes a Matrox CompressHD card, you can also export your
sequence to a Matrox MAX H.264 file as explained in your Matrox CompressHD
Installation and User Guide.
Remarks
• When batch encoding clips that use the same Matrox VFW codec, they must
have the same codec settings. For example, you cannot export multiple clips
with the Matrox MPEG-2 I-frame HD codec that have different data rates.
You can, however, batch encode clips using different Matrox VFW codecs
and clips that use the same Matrox VFW codec with identical codec settings.
• To export clips from a Matrox NTSC or 486p sequence to a 720×480
Matrox .avi file using a Matrox VFW DV or MPEG-2 I-frame codec, you
must crop the height of the video by applying cropping on the Source page
of the Export Settings dialog box as follows:
Sequence format
Sequence format
Chapter 7, Defining Your Adobe Premiere Pro Settings
GPU-accelerated effects disabled (software only)
NTSC Top = 5, Bottom = 1
486p Top = 4, Bottom = 2
GPU-accelerated effects enabled
NTSC Top = 3, Bottom = 3
Top = 4, Bottom = 2
486p
Codecs."
Crop settings
Export to DV
Crop settings
Export to DV
Chapter 11,
Export to MPEG-2 I-frame
Top = 5, Bottom = 1
Top = 6, Bottom = 0
Export to MPEG-2 I-frame
Top = 5, Bottom = 1
Top = 6, Bottom = 0