Specifying Your Audio Capture Settings - Matrox Axio Installation And User Manual

Consumer-quality Source
$
capturing video because your source device doesn't meet
broadcast-quality standards. For example, the capture may be interrupted
when you try to capture from certain composite and S-Video devices,
especially from low-quality VCRs. If this happens, selecting
Consumer-quality Source
may experience dropped frames during the capture.
¦ Note For any change to the input type to take effect, you must restart
Premiere Pro and open your project again.
13 Click OK to save your settings and return to the Project Settings dialog
box.

Specifying your audio capture settings

You can specify various audio capture settings, such as to specify your input
source and the type of audio files (either stereo .wav or mono .wav) that you want
to create when capturing audio on Matrox Axio.
Remarks
• When you capture to an .avi file on Matrox Axio, the clip's video and audio
are saved to the .avi file, and the clip's audio is also saved to one or more
separate .wav files. You could choose to edit the separate .wav files using
audio post-processing software, such as Adobe Soundbooth.
• When you capture to an .m2v file on Matrox Axio, the clip's associated
audio is always saved to one or more separate stereo .wav files.
° To specify your settings for capturing audio in Adobe Premiere Pro on
Matrox Axio:
Choose Project > Project Settings > General .
1
From the Capture Format list, select Matrox AVI to capture to an .avi file,
2
or Matrox M2V to capture to an .m2v file (for SD sequences only).
Select this if you're having problems
will allow the video to be captured, but you
Defining your capture settings
81