Table of Contents
Advertisement
38
Attaching the rackmount brackets
Left rackmount bracket
Unpack the two rackmount brackets and their four mounting screws.
1
²Caution
the rackmount brackets to your X.link breakout box. If you use screws that
are larger or longer than the ones supplied, you can damage your equipment.
Use the guide tabs on the bracket to help line up each bracket with its
2
respective screw holes on the back of the breakout box.
¦ Note
wider than the right bracket in order to accommodate the width of the left side
of the breakout box.
Using a hand screwdriver only (no power screwdrivers), carefully tighten
3
each screw until snug. Do not overtighten!
Attach the ferrite beads to the X.link cable
The ferrite beads prevent electromagnetic interference from other electronic
devices.
Position an open ferrite bead no more than 1" from one end of the X.link
1
cable.
2
Snap the ferrite bead shut, enclosing the cable within.
Chapter 5, Connecting External Devices to Matrox Axio HD and SD
Use only the screws supplied with your Matrox Axio kit to attach
Be aware that the mounting brackets are different. The left bracket is
Right rackmount bracket
Advertisement
Table of Contents
