Table of Contents
Advertisement
Specifying your video output settings (X.linkSD)
You can specify various settings to configure your video output signals from the
X.linkSD breakout box, such as to adjust the gain of your analog video, and
adjust the horizontal delay of your SDI video.
° To specify your video output settings:
Choose Sequence > Sequence Settings and click the Playback
1
Settings
Click the Video Output tab.
2
Under Component Gain , use the sliders to increase or decrease the Y
3
(luminance), Cb (blue minus luminance), and Cr (red minus luminance) gain
of the component video output.
Under S-Video Gain , use the sliders to increase or decrease the Y
4
(luminance) and C (chrominance) gain of the S-Video output.
5
Under Composite Gain , use the slider to increase or decrease the gain of
the composite video output.
Under Master Output Format , select the video format you want for all
6
video outputs from the X.linkSD breakout box. Depending on your
sequence's video format, you may not be able to change the master output
format.
¦ Note
If you're working with an HD sequence, the master output format will
automatically be set to NTSC or PAL depending on your sequence's video
button.
Defining your sequence settings
63
Advertisement
Table of Contents
