User Options 4; User Time Lock; Predefined User Profiles - Texecom Premier 640 Installation Manual

Programming the Control Panel

User Options 4

T - Custom2A=No Tag
When Custom Output2A is active the user cannot use their
TAG to access the system, access to setting, unsetting and
user menus can only be gained via the user code.
C - Custom2B=No Code
When Custom Output2B is active the user cannot enter their
user code, they must use a TAG..
Custom Output2B is normally programmed to operate during
the entry time when the panel is fully armed. This is conform
with the requirements for a EN50131 Grade 3 panel. Users
will only be able to unset the panel during entry with a TAG.
D - Tag+Code Needed
Users are required to enter their user code and present their
TAG in order to set or unset the system or gain access to
user menus.
S - Fob PA is Silent
Operation of the users Radio FOB PA generates a silent PA
alarm.

User Time Lock

The Premier 640 provides 8 Custom timers, each with 2 on
and 2 off controls.
Setting the User Locked by attributes to any combination of
these timers allows the selected User Profile to be disabled
at certain times and on certain days.
When a timer selected in User Locked by switches on, the
selected User Profile is disabled and all users assigned to
the profile will be unable to enter their codes or use TAGs or
FOBs to set, unset or access user menus.
See page 52 for details on programming control timers.

Predefined User Profiles

There are a number of preset user profiles available by default
User profiles 1 & 2 cannot be altered.
01: Engineer
Engineers can arm, disarm, omit zones, silence alarms and
reset their assigned areas. In addition, Engineers can access
the Programming Menu and all User menu options.
Engineers can also change their own User codes and assign
new users to the system.
!
The default Engineer User type (User 00) can assign
any User types to the system.
Engineers can only disarm areas that were armed
using an Engineer code. They cannot disarm any areas
that were armed with another User code.
02: Master
Master users can arm, disarm, omit zones, silence alarms
and reset their assigned areas. In addition, Master users can
access all User menu options. Master users can also change
their own User codes and assign new users to the system.
The Master user will also activate any output programmed as
'Door Strike'.
03: Manager
Manager users can arm, disarm, omit zones, silence alarms
and reset their assigned areas. In addition, Manager users
can access all User menu options except Setup Users.
Manager users can also change their own User codes.
88
04: Standard
Standard users can arm all the areas assigned to the code
and disarm all the areas assigned to the code (even if only
one area is in entry or alarm) from any keypad, omit zones,
silence alarms and reset their assigned areas. In addition,
Standard users can access all User menu options except for
Setup Users, System Tests, and Change Timers. Standard
users can also change their own User codes.
05: Local
Local users behave the same way as Standard users. However,
Local users will only arm the area that the keypad is assigned
to and disarm the area that is in entry or alarm (provided that
the code has that area assigned to it
06: Duress
Duress users behave the same way as Standard users.
However, Duress users will activate any outputs programmed
as 'Panic Alarm' or 'Duress' whenever their code is entered.
!
Duress users can only be set up by an Engineer if system
is set to Grade 3 – see configuration option 37.
07: Arm Only
Arm Only users can only arm or reset their assigned areas
and view the event log.
08: Door Strike
Door Strike users have no access to User functions or Menu
options. However, Door Strike users will activate any outputs
programmed as 'Door Strike' whenever their code is entered
(see page 64 for details).
09: Vacation
Vacation users behave the same way as Standard users.
However, Vacation users will automatically be deleted the first
time that the Master User code (User 01) is used to disarm
the system.
!
Vacation user can only be deleted by the Master user
after it has been used to disarm the system at least
once.
10-32: Custom User Profiles
Custom User Profiles can be programmedenable users to
access any functions and User menu options.
!
User Profiles 1 and 2 cannot be altered, all others can
be programmed.
Premier 640 Installation Manual
INS344