System Options - Texecom Premier 640 Installation Manual

Premier 640 Installation Manual
Panel Grade 2
All options relating to PD6662: 2004/EN 50131-1 Grade 3 that
are not required for Grade 2 are disabled automatically. Also, the
Premier Anti-code reset becomes the standard 4 digit number
and all user and engineer codes can be 4, 5 or 6 digits.
38 - Disable FOB PA
When a 'RadioPlus' Transmitter FOB is being used with the
alarm system, the Panic Alarm (PA) function i.e. Pressing
buttons 1 and 2 together, is disabled.
Enable RF FOB PA
When a 'RadioPlus' Transmitter FOB is being used with the
alarm system, the Panic Alarm (PA) function i.e. Pressing
buttons 1 and 2 together, is enabled.
39 - Armed Mask=Fault
If an Anti-masking signal is detected when the system is
armed, the control panel will generate a Fault response.
Armed Mask=Alarm
If an Anti-masking signal is detected when the system is
armed, the control panel will generate an Alarm response.
INS344

System Options

>73!:0!3$-$6:Z[
V-0E(-!HO:508<
Yes
V-0E(-!HO:508<
3=<:$/!"5/$)<
2
abc
V-0E(-!HO:508<
3=<:$/!HO:508<
Yes
.D45<0)=!T0-#/$
!!!!?$4$-!d!A
Yes
,K5/$!T0-#/$
!!!!?$4$-!d!*
No
,K5/$!T0-#/$
!!!!?$4$-!dW*
7
pqrs
,K5/$!T0-#/$
!!!!?$4$-!d!X
Yes
These options control various system functions.
1 - Advisory Volume
Controls the volume of advisory tones (entry/exit etc.) from
loudspeakers connected to the control panel (Alarm tones are
always full volume). 1 = min, 8 = max.
2 - Chime Volume
Controls the volume level of Chime tones from ALL
loudspeakers. 1 = min, 8 = max.
3 - No. Of Re-Arms
Controls the number of times that a zone will re-arm. Once the re-
arm limit has been reached, the zone is 'Locked Out' and will not
cause any further Intruder alarms.
4 - Anti-code Resets
Limits how many times a user can perform an Anti-code reset.
Once this limit is been reached, the system can only be reset
using an Engineer code. This counter is reset every month or
whenever an Engineers code is entered.
5 - Multiple Knocks
Controls how many times, a zone with the 'Double Knock'
attribute, must be activated, before an alarm occurs. The
multiple knock count can be applied to zones on an area
basis, see page 44 for details.
6 - Clock Adjustment
Adjusts the accuracy of the clock by subtracting or adding
time in seconds at midnight every night. 0 = -50, 50 = 0 (no
correction), 100 = +50.
7 - Quick Count
Set the number of 10milli Second pulses that are required
within 30 Seconds in order for a zone with the 'Quick
Response' attribute to activate.
8 - Modem Level
When using a Com2400 this option allows adjustment to the
attenuation of the modem.
Modem Level 2 1
Attenuation (dB) +4 +2
Programming the Control Panel
Use the YES key to move
to the next option or use
the SCROLL key to search
Press NO to edit
the volume level
Enter a value or use the
SCROLL key to increase
or decrease the value
e.g. 8 = Full Volume
0 7 6 5 4
0 -2 -4 -6 -8
3
-10
51