Area Text; Area Profiles - Texecom Premier 640 Installation Manual

Programming the Control Panel

Area Text

YES to Select:-
Area Programming
Yes
Area Programming
Timers
7
pqrs
Area Programming
Area Text
Yes
Text for Area A1
Text for Area A1
Area
Text for Area B2
No
^Edit Text >TXT
Omit
^Edit Text >ABC
????
Reception
Edit Tex^ >ABC
Yes
Text may be assigned to each of the areas on the system.
This allows the user to select the areas by description instead
of a letter. A maximum of 16 characters can be programmed
for each of the areas.
Text is programmed in a similar way to mobile phones. Select
characters by pressing
appropriate number of times (to select a character on the
same key, press to move the cursor along).
%
46
Use the SCROLL key to
select an area
Use the AREA key to
Jump a block of 8 areas
(A2-B2, C1-D1 etc)
Use Omit key to switch
between predictive text
(TXT) and character (ABC)
Entry
Use keys 0 - 9 to program
text the same way that a
mobile phone works
the corresponding key

Area Profiles

YES to Select:-
Area Programming
Yes
Area Programming
Timers
8
Area Programming
Area Profiles
Yes
* * Area 01 * *
01:<A:1.......
??
* * Area 03 * *
03:<A:..3.....
No
* * Area 03 * *
03:>A:..3.....
* * Area 03 * *
03:>C:........
???
Main Warehouse
03:>C:1.3....8
Yes
* * Area 03 * *
03:>C:........
Omit
* * Area 03 * *
^Edit Text
Omit
* * Area 03 * *
^Edit Text
the
???
Lower Floor
Edit Text ^ >ABC
Yes
Area profiles are used to define homogeonous groups of
areas that belong to an entity such as a company,
department or floor of a building.
Each profile can be annotated with a 16 character name.
80 Area profiles are provided. Profile number 00 and 80 are
special and cannot be edited (00-No Areas, 80-All Areas)
All other areas can be programmed with any combination of
up to 64 Areas.
When an area profile is assigned to a User, Keypad or
Expander, all of the areas assigned to the profile will are also
assigned to the User, Keypad or Expander. Any changes to
the profile will then be automatically carried through to all of
its associations.
Premier 640 Installation Manual
tuv
Enter the Area Profile or
U
Use the key
ie 03 selects Profile 03
Press NO to change
Profile setup
U
Use the key to
change the area group
Top line=Profile text
Bottom line=included areas
Use keys 1-8 to select
the areas in the group
Top line=Area text for area just added
Bottom line=included areas
Press OMIT at any time
to edit Profile text
>TXT
Use Omit key to switch
between predictive text
(TXT) and character (ABC)
Entry
>ABC
Use keys 0 - 9 to program
text the same way that a
mobile phone works
INS344