Digi Options; Area Accounts - Texecom Premier 640 Installation Manual

Premier 640 Installation Manual

Digi Options

>73!:0!3$-$6:Z[
\C?]C595!HO:508<
Yes
\C?]C595!HO:508<
;$<$:!C595
4
ghi
\C?]C595!HO:508<
C595!HO:508<
Yes
C595!HO:508<
!1!1!1!1!1!1
No
C595!5<!78(E-$D
W1!1!1!1!1!1
N-58D!C5(--589
!1!1!1W1!1!1!
No
N-58D!C5(--589
!1!1!1WN!1!1!
Yes
There are 6 options that control how the plug-on
communicator works.
Select options by pressing keys 1 to 8 (a letter on the display
means the option is selected, a Dot on the display means the
option is not selected).
E - Digi is Enabled
The plug-on communicator will report all system events to the
Alarm Receiving Centre.
P - Pulse Dialling
The plug-on communicator will always dial telephone
numbers using pulse dialling.
3 - Pulse After 3
The plug-on communicator will always dial telephone
numbers using tone dialling. However, if the Communicator
fails to dial the number three times in a row, it will revert to
pulse dialling for the remaining attempts.
B - Blind Dialling
The plug-on communicator will not look for a dial tone before
dialling a telephone number.
U - Use MSN/Pre-Dial
The ComISDN will only answer a call when the programmed
MSN/Pre-Dial telephone number is dialled.
A - Dial All Numbers
If the communicator is acknowledged by the first ARC, it will
continue to dial any other programmed ARC. This is normally
used when a second or third ARC is programmed with SMS
Messaging.
INS344
Press NO to edit
the Digi option
Use keys 1 - 8 to select
an option or use the
SCROLL key to search
Press NO to
select/deselect
the option

Area Accounts

YES to Select:-
UDL/Digi Options
Yes
UDL/Digi Options
Reset Digi
6
mno
UDL/Digi Options
Area Accounts
Yes
Area 01 Account:
??
Area 02 Account:
No
^ >123
????
Area 02 Account:
--1234
Yes
When using Fast Format, Contact ID or SIA, areas A1 to B8
can have their own account number to identify events.
Accounts are selected as account numbers 01 to 16 and they
refer to the system areas as follows.
Selected
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
The programmed account number will be reported to the
Alarm Receiving Centre when any reportable event occurs.
Each account number can be up to 6 digits.
!
In order for the control panel to use the area account
numbers, the area account Config. option must be
enabled (see page 70 for details).
Programming the Control Panel
Enter Area number (01-16)
ie 02 = Area 02
(Area No. 01= Area A1)
Press NO to edit
the account number
Use keys 0 - 9 to enter
the account number
e.g. 1234 = Account 1234
Panel Area
A1
A2
A3
A4
A5
A6
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
71