Monitor Hardware; Control Timers - Texecom Premier 640 Installation Manual

Programming the Control Panel

Monitor Hardware

>73!:0!3$-$6:Z[
V-0E(-!HO:508<
Yes
V-0E(-!HO:508<
3=<:$/!"5/$)<
3
def
V-0E(-!HO:508<
'085:0)!e()DJ()$
Yes
'085:0)!e()DJ()$
!.!.!2!N!.!?!M
No
."3!I(:K!2(#-:<
W.!.!2!N!.!?!M
N$--!"(/O$)
!I!.!2WN!.!?!M
No
N$--!"(/O$)
!I!.!2WM!.!?!M
Yes
The control panel monitors many inputs for fault conditions
i.e. the panel lid tamper, bell tamper, aux fuse etc.
Each one of these options can be disabled to overcome
problems related to the devices being monitored.
P - ATS Path Faults
The Alarm Transmission System is monitored for faults.
A - AC Power Failure
The AC Mains is monitored for faults.
F - Aux Fuse Blown
The Auxiliary Fuse/PTC is monitored for faults.
B - Bell Tamper
The external sounder tamper loop is monitored for faults.
A - Aux Tamper
The auxiliary tamper loop is monitored for faults.
L - Panel Lid Tamper
The control panel lid tamper is monitored for faults.
B - Battery Faults
The battery is monitored for faults.
52
Press NO to edit
the options
Use keys 1 - 8 to select
an attribute or use the
SCROLL key to search
Press NO to
select/deselect
the option

Control Timers

>73!:0!3$-$6:Z[
V-0E(-!HO:508<
Yes
V-0E(-!HO:508<
3=<:$/!"5/$)<
4
ghi
V-0E(-!HO:508<
,08:)0-!"5/$)<
Yes
,08:)0-!"5/$)!+(
5<!H8!(:!W+fZ%%
,08:)0-!"5/$)!*(
5<!H8!(:!W+fZ%%
????
,08:)0-!"5/$)!*(
5<!H8!(:!W++ZA*
Yes
"5/$)!*(!H8!C(=<
1111111111111111
1
"5/$)!*(!H8!C(=<
3#11111111111111
Yes
,08:)0-!"5/$)!*(
5<!HBB!(:!W+*Z%%
????
,08:)0-!"5/$)!*(
5<!HBB!(:!W*+Zfg
Yes
"5/$)*(!HBB!C(=<
1111111111111111
1
"5/$)*(!HBB!C(=<
1111"#1111111111
Yes
The Premier 640 has 8 control timers. Each timer has two ON
and OFF times (a & b), and can be programmed to operate on
any day of the week. Once configured, the timers can be used to
arm or disarm areas, lockout users and control outputs.
!
When programming the Control Timers ON time,
pressing will bring a '*' up on the display. This '*'
2
indicates that the internal sounders will chime every
time the Control Timers ON time is reached.
When programming the Control Timers DAYS of
operation, pressing
display. This 'HO' indicates that the control timer will
operate on any programmed Holiday date.
Premier 640 Installation Manual
Use the SCROLL key to
select control timer 1 - 8
Enter the 'a' On time
for e.g. 1152 = 11:52 am
Press YES to select
the 'a' On Time
'DAYS OF OPERATION'
Use keys 1 - 8 to select
the days 1 = Sunday
through to 7 = Saturday
(8 = Holiday Date)
e.g. 1 = Sunday
Press YES to select
the 'a' Off Time
Enter the 'a' Off Time
for e.g. 2134 = 9:34 pm
Press YES to select
the 'a' Off Time
'DAYS OF OPERATION'
Use keys 1 - 8 to select the
days e.g. 3 = Tuesday
will bring 'HO' up on the
*
INS344