Udl/Digi Options; Reset Digi; Start Test Call; Msn/Pre-Dial No - Texecom Premier 48 Installation Manual

Premier 48, 88, 168 & 640 Installation Manual

5.7 UDL/Digi Options

Reset Digi

Yes
Yes
This option should be used whenever a Premier plug-on
communicator is plugged on or removed from the control
panel.

Start Test Call

Yes
1
Yes
0 _
Menu
When a Premier plug-on communicator has been fitted to the
control panel. This option can be used to send a test call to
the Alarm Receiving Centre or to initiate a remote
Upload/Download call to one of the programmed callback
numbers.
INS176
Press RESET to reset the
digimodem - a confimation
tone will be heard
Press 0 to send a test call
or 1, 2 or 3 to initiate an
upload to a remote computer

MSN/Pre-Dial No.

Yes
2
abc
Yes
????
Yes
When a ComISDN is connected to an extension of an ISDN line
with more than 1 number, the direct dial number should be
programmed in here, this ensures that the ComISDN will only
answer a call when the direct dial number is dialled. This
number can be up to 24 digits.
The Use MSN/Pre-Dial option must also be enabled
(see page 71 for details).
When entering the telephone number the following extra keys
can be used:
Programming the Control Panel
Use keys 0 - 9 to
enter numbers,
Omit = *, Chime = #
Part = 3 second Pause
Area = 10 Second Pause
67