Table of Contents
Advertisement
4.1.3
Disassembly Sequence
The disassembly procedure described in this manual is divided into four major sections:
•
Section 4.2:
•
Section 4.3:
•
Section 4.4:
•
Section 4.5:
•
Section 4.6:
The following table lists the components that need to be removed during servicing. For example,
if you want to remove the motherboard, you must first remove the keyboard, then disassemble the
inside assembly frame in that order.
Table 4-1
Guide to Disassembly Sequence
Service Item
Install CPU
Remove the keyboard
Remove or replace the hard disk drive
Install additional memory
SIMM socket 1
SIMM socket 2
Remove the touchpad
Replace the LCD
Remove the motherboard for service
or replacement
The following diagram details the disassembly flow.
Removing the module
Removing the keyboard
Removing the hard disk drive
Disassembling the inside assembly frame
Disassembling the display
Remove the keyboard.
Remove two speaker covers on both sides and one center hinge
cover.
Remove the lower unit of lower case
Remove the lower unit of lower case
Remove the SIMM door.
1. Remove the keyboard.
2. Remove the LCD display module.
3. Remove the upper unit of lower case.
Remove the LCD display module.
1. Remove the keyboard.
2. Remove the LCD display module.
3. Remove the lower unit of lower case.
Prerequisite
Advertisement
Table of Contents
