3.4
System Configuration
The following screen is the basic system configuration screen.
Current Date ---------------- [09/16/96]
Current Time ---------------- [16:30:35]
Diskette Drive A ------------ [1.44 MB 3.5-inch]
Diskette Drive B ------------ [
Hard Disk 0 (1160 MB) ------- [Auto]
Hard Disk 1 (
Num Lock After Boot --------- [Disabled]
LCD Expansion Mode ---------- [Disabled]
↑↓ = Move Highlight Bar, ←→ = Change Setting
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
Press ↑ ↑ or ↓ ↓ to move from one parameter to another, and ← ← or → → to change parameter settings.
Most of the parameters are self-explanatory, but you can press F1 to get help on the selected
parameter. Press Esc to exit the screen and return to the main menu.
3.4.1
Date and Time
The current date is in MM/DD/YYYY format. The current time is in HH:MM:SS format. The
system uses a 24-hour clock which means, for example, that 6:25:50 PM appears as 18:25:50.
3.4.2
Diskette Drives
The default setting for Diskette Drive A is [1.44 MB 3.5-inch] and refers to the floppy drive
whether it is installed in the module bay or connected externally via the parallel port. Diskette
Drive B by default is set to [None], and is only enabled if two floppy drives are connected to the
notebook.
Basic System Configuration
0 MB) ------- [Auto]
Page 1/1
None
]
Cylinder
Head
2358
16
0
0
Sector
63
0