4.5
Disassembling the Housing
This section discusses how to disassemble the housing, and during its course, includes removing
and replacing of certain major components like the hard disk drive, memory and the main board.
4.5.1
Detaching the Lower Housing from the Inside Assembly
To detach the lower housing from the inside assembly, turn the unit over and remove seven (7)
base screws. Then snap out the lower part of the housing.
Screw list:
'
M2.5L8 x7
Figure 4-13
Removing the Hard Disk Drive Bay Cover
Detaching the lower housing from the inside frame assembly allows you to remove/install the hard
disk drive, as well as remove/install memory modules.
'
'
'
'
'
'
'